Exacq exacqVision E-Series User Manual Manual do Utilizador

Digital Encoder E-Series User Manual (updated June 10, 2015) Information in this document is subject to change without notice. © Copyright

10 www.exacq.com E-ADE4C REAR PANEL Item Description 1 ALARM IN Relay alarm input. 2 ALARM OUT Relay alarm output. 3 RS-232 Serial i

11 www.exacq.com Alarm Input Connections The encoder supports the open/close relay input as the alarm input mode. For the alarm input signal n

12 www.exacq.com 3 Network Parameters There are two ways an IP address can be assigned to the encoder:  If a DHCP server is available, an

13 www.exacq.com Modifying Network Parameters 1. Select the device to be modified in the device list. 2. Network parameters of the selected

14 www.exacq.com 4 Connecting to an exacqVision System NOTE: The latest version of exacqVision Client can be downloaded from https://exacq.c

15 www.exacq.com Verifying the Connection To verify that the encoder is transmitting video and audio from its cameras to the exacqVision server

16 www.exacq.com 5 Encoder Configuration Page NOTE: Many common settings on the encoder, such as motion configuration and video settings,

17 www.exacq.com 2. Enter the User Name (default: admin) and Password (default: admin256), and then click Login. 3. Download and install th

18 www.exacq.com Main Page After successful login, the main page opens automatically. The following features are available on this page: 1

19 www.exacq.com 6 Live View Live View shows you the video image transmitted from the connected camera in real time. After successful logi

2 www.exacq.com

20 www.exacq.com 3. Click the button to start the Live View for all cameras on the device list. Additional toolbar buttons: Icon Descriptio

21 www.exacq.com Operating PTZ Controls Before you operate PTZ controls: 1. Make sure the encoder is connected to a camera/dome that supports

22 www.exacq.com The following controls are also available: Button Description Zoom in/out Focus near/far Iris open/close Light Wiper A

23 www.exacq.com To call a preset in Live View mode, select a predefined preset from the list and click the icon. The preset can also be u

24 www.exacq.com Configuring Video Parameters Normally, video parameters such as brightness, contrast, saturation, and hue are controlled usi

25 www.exacq.com 7 Device Configuration NOTE: Many common settings on the encoder, such as motion configuration and video settings, can be c

26 www.exacq.com Configuring Time Settings 1. On the Remote Configuration menu, select Device Parameters, and then Time Settings to open the T

27 www.exacq.com 8 Network Settings Configuring TCP/IP Settings 1. From the Remote Configuration menu, select> Network Settings and then

28 www.exacq.com Configuring SNMP Settings Simple Network Management Protocol (SNMP) is an Internet-standard protocol for managing devices on

29 www.exacq.com 8. If needed, enable SNMPv3 9. Configure the read username (default: public). 10. Select the security level to “auth, priv

3 www.exacq.com TABLE OF CONTENTS 1 Introduction ...

30 www.exacq.com Configuring Port Settings 1. From the Remote Configuration menu, select Network Settings and then Port to open the Port Sett

31 www.exacq.com Configuring PPPoE Settings Access by Point-to-Point Protocol over Ethernet (PPPoE) is also available. 1. From the Remote C

32 www.exacq.com Configuring QoS Settings QoS (Quality of Service) can help solve network delays and congestion by configuring the priority of

33 www.exacq.com Configuring SOCKS Settings SOCKet Secure (SOCKS) is an Internet protocol that routes network packets between a client and serv

34 www.exacq.com Configuring NAT/UPnPTM Settings UPnP™ can permit the device to seamlessly discover the presence of other network devices on t

35 www.exacq.com 6. You can view the status of the port mapping in the Port Status area. 62

36 www.exacq.com Configuring HTTPS Settings HTTPS (Hyper Text Transfer Protocol Secure) ensures the data transferred is encrypted using Secure

37 www.exacq.com 3. Create the authorized certificate:  Click the Create button to create the certificate request.  Download the certifi

38 www.exacq.com Configuring Bonjour Settings Bonjour is enabled by default, and the video encoder can be automatically detected by operating

39 www.exacq.com Configuring IP Address Filter You can allow or forbid access by specified IP addresses to the encoder by enabling IP Address

4 www.exacq.com Configuring Bonjour Settings ...

40 www.exacq.com Configuring IEEE 802.1x Settings You can use IEEE 802.1x as an authentication mechanism if using a LAN or WLAN. 1. From the

41 www.exacq.com Configuring Advanced Settings The Advanced page allows you to configure an alarm host. 1. From the Remote Configuration me

42 www.exacq.com 9 Camera Settings NOTE: Many common settings on the encoder, such as motion configuration and video settings, can be config

43 www.exacq.com 6. In the preview image, you can adjust the OSD location on the screen by moving the text frame. 7. To copy the displa

44 www.exacq.com Configuring Video Settings To configure video settings, complete the following steps: 1. From the Remote Configuration menu,

45 www.exacq.com Configuring Motion Detection Motion detection can trigger an alarm and record video when motion is observed in the camera vi

46 www.exacq.com 5. Draw the motion detection area by clicking and dragging the mouse in the live video image. Up to eight motion detection ar

47 www.exacq.com Set the Arming Schedule for Motion Detection 1. Select the Arming Schedule tab. 2. Click the Edit button to open the Edi

48 www.exacq.com Set the Alarm Actions Taken for Motion Detection 1. To specify the alarm type when an event is triggered, select the Linkag

49 www.exacq.com Configuring a Video Loss Alarm To configure the video loss alarm, complete the following steps: 1. From the Remote Configura

5 www.exacq.com 1 Introduction exacqVision E-Series 1- and 4-channel encoders capture analog video and audio signals; encode the content usi

50 www.exacq.com Configuring a Privacy Mask A Privacy Mask enables you to cover certain areas on the video of the channel to from live vi

51 www.exacq.com Configuring Video Tampering To configure video tampering, complete the following steps: 1. From the Remote Configuration men

52 www.exacq.com Configuring Text Overlay To configure the text overlay, complete the following steps: 1. From the Remote Configuration menu,

53 www.exacq.com Configuring Holiday Settings If you want a separate recording schedule on holidays, complete the following steps: 1. From t

54 www.exacq.com 10 RS-232 and RS-485 Settings NOTE: RS-232 is not available on one-channel encoders. Configuring RS-232 To configure RS-232,

55 www.exacq.com Configuring RS-485 Settings The RS-485 serial port is used to control the PTZ of the camera. To configure RS-485, complete the

56 www.exacq.com 11 Alarm Input/Output Configuring the External Alarm Input To configure the external alarm input, complete the following st

57 www.exacq.com 4. Select the Linkage Method tab to set the actions taken for the alarm input. Select any or all of Full Screen Monitoring, A

58 www.exacq.com Configuring the External Alarm Output To trigger an external alarm output when an event occurs, open the Alarm Output Settin

59 www.exacq.com 12 Exceptions The exception type can be network disconnected, IP address conflict, illegal access, video standard mismatch,

6 www.exacq.com Alarm  Relay alarm input; normally open or normally closed; four configurable alarm arming periods; triggering of correspond

60 www.exacq.com 13 User Management The admin user can create up to 31 users. From the Remote Configuration menu, select User Management to

61 www.exacq.com Adding a User To add a user, complete the following steps: 1. Click Add (not shown) to enter the Add User interface. 2. Inp

62 www.exacq.com Modifying a User To modify a user account, an admin must complete the following steps: 1. Select the user account from the l

63 www.exacq.com Deleting a User To delete a user account, complete the following steps: 1. Select the user account from the list in the User

64 www.exacq.com 14 Device Information and Maintenance Viewing Device Information From the Remote Configuration menu, select Device Paramet

65 www.exacq.com Maintenance From the Remote Configuration menu, select Maintenance to open the Maintenance interface: Restarting the Dev

66 www.exacq.com Restoring Default Settings On the Maintenance page, select Restore to restore the default settings for all parameters except

67 www.exacq.com A Technical Support Exacq Technologies is committed to providing exceptional technical and engineering support. When you ne

68 www.exacq.com B Regulatory Notice Federal Communications Commission (FCC) Radio Frequency Interference Statement The Exacq Product conta

69 www.exacq.com C Warranty LIMITED WARRANTY AND LIMITATION OF LIABILITY LIMITED WARRANTY. Exacq hardware products are warranted against d

7 www.exacq.com 2 Encoder Overview E-ADE1C FRONT PANEL Item Description 1 POWER LED Indicator Red when the device is powered on. 2

8 www.exacq.com E-ADE4C FRONT PANEL Item Description 1 POWER LED Indicator Red when the device is powered on. 2 LINE IN 3.5mm two-way

9 www.exacq.com E-ADE1C REAR PANEL Item Description 1 ALARM IN /OUT Relay alarm input/output. (JP2 pin not available on output.) 2 RS-485